A shorter, lighter, more efficient suppressor for rifles chambered in 7.62x51mm NATO and .30 caliber cartridges of similar case capacity, the Gemtech HVT sets the bar for endurance and reliability. It is offered in either threadmount or maintenance-free Quick-Mount fast attach configurations. The HVT has an unusually quiet sound signature that is indistinguishable from, and masked by, the bullet flight noise, making it ideal for both urban and rural tactical operations. Recoil and visual signature (flash, dust) are reduced greatly along with the audible signature.
With our high-accuracy / low-blowback baffle design that the U.S. Navy deemed “highly favorable” in limiting rate-of-fire increase, the HVT makes for an excellent choice on automatic rifles as well as bolt-action precision rifles.
The Gemtech Quick-Mount attachment system permits consistent mounting with repeatable accuracy. The male mount is torqued into position over a threaded barrel to assure utmost accuracy, and the suppressor affixes over with a simple, one-handed movement with no gates, latches, or threads to stick or fumble. It’s either on, or it’s off. There are no “Is it on where it should be?” questions with the Quick-Mount.
While the Quik-Mount retains backward compatibility with the original Bi-Lock flash hider mounting system, the mount has been totally re-designed for limited or no maintenance.
Quick-Mounts are available in flash hider style to fit factory threading on M1A/M14, AR10, HK417, and other AR-type automatic rifles, or in a tensioning back-over-barrel mount for bolt action rifles. Thread Mounting units are available in 5/8-24 or M18x1 configurations.
The Quik-Mounts muzzle adapters are the patented Bi-Lock flash-hider/mounts and are torqued into position to assure utmost accuracy. Additional Bi-Lock mounts are available in order that the HVT suppressor may be used with multiple .30 caliber rifles.
The phantom style flash hider style bi-lock mount provides outstanding flash suppression and is most popular on semi-automatic tactical rifles. Mounts are threaded 5/8-24. Also available is a Phantom style flash hider mount specifically for the M1A/M14 rifle.
The barrel tensioning style bi-lock mount telescopes back over the barrel to tension the critical distal 2 inches of the barrel against a square shoulder to provide utmost accuracy. This is the most compact mount, with the crown at the far end of the bi-lock. Muzzle tensioning is a proven accuracy enhancing technique. Mounts are threaded 5/8-24.
THREAD MOUNT OPTIONS:
Thread mounting HVT suppressors normally are threaded 5/8-24, an industry standard. On special order, the thread mount version HVT can be supplied with metric M18x1 threads found on a number of European rifles.
Caliber: 7.62mm / .308
O.A. Length (Thread mount): 8.25 inches
O.A. Length (Quik-Mount): 9.1 inches
Diameter: 1.5 inch
Weight (Thread mount): 24 ounces
Weight (Quik-Mount): 28 ounces
Materials: Stainless steel
Finish: Optically flat black oxide
Only
two defining forces have ever offered to die for you:
...Jesus Christ and the American G. I.
...One died for your soul; the other for your freedom.
